CME Products: Accessories - Compressed Air Hoses

Compressed Air Hoses
A Challenge to Heavy, Bulky Air Hoses

CME is a new concept - A lay-flat construction with extremely low weight.
For heavy use and tough conditions.
Long life - easy to transport and to roll out, is flexible at all temperatures.
Execllent in warm climates and also flexible at low temperatures (-30 degrees C.)
Resistant to oils and chemicals.
Minimum friction loss - ideal for transport of great volumes of compressed air over long distances, can use larger dimensions where conventional hoses restrict due to weight.
Available in 60 and 40m (197 and 131 ft.) lengths, can be delivered up to 200m (656 ft.)

Compressed Air Hose

TECHNICAL SPECIFICATIONS
DIAMETER		APPROX. WEIGHT		BURSTING PRESSURE		MAX. WORKING PRESSURE
inch	mm	kg/m	lb/ft	kp/cm2	psi	kp	psi
1	25.4	0.275	0.185	80	1100	10	145
1 1/2	38	0.390	0.212	58	800	10	145
2	51	0.580	0.390	57	800	10	145
2 1/2	65	0.800	0.500	53	750	10	145
3	76	0.900	0.600	45	640	9	128
3 1/2	90	2.050	0.750	35	500	7	100
4	102	1.310	0.960	35	500	7	100
6	150	1.500	1.100	25	350	5	75

[ Grinding Accessories ] [ Blasting Accessories ] [ Compressed Air Hoses ]

Simple to Repair

CME hose can tame rough treatment. If punctured it is simple to repair. With sizes ranging from 1 1/2" and upwards, all that is necessary is to slide a section of hose of the same size over the damaged area and the hose is repaired. A silicone glue is recommended for permanent seal. A good tip is to slide on a couple of extra hose sleeves before the nipples are attached.